TAKE THE LEAP
YOU HAVE WHAT IT TAKE
Introducing the NEW Elihu X-Lite Series, with
unmatched features. Starting at $12,498
ALL ELIHU X-LITE SERIES SYSTEMS INCLUDE :
- All-In-One CNC Interface
- Ohmic Sensing (Probe zero sensing)
- Collision Detection Head (includes torch squaring and integrated floating head proximity sensor)
- Z-Axis Lifter 6.5″ (Provides 6.5″ of Z-axis travel)
- 5 Year Warranty on all CNC electronics
- 5 year Warranty on all Mechanical Components
- Lifetime Tech Support
Optional
- Intel NUC PC i5 Processor upgradable to i7 Processor
- Arc Professional – All In One Software (CAD, CAM, CNC)
- 2 PC Software Licensing
- ELIHU PC Pedestal with integrated serge protector and wire shielding (Recommended)
- Rotary Axis Gantry (Including Lathe Chuck (4″, 8″, and 16″ available)
- Air Bladder with water level adjustment (used for small part removal, maintaining proper water level, and machine clean out)
BUILD YOUR SYSTEM
Design Features:
- 3:1 Motor Reduction
- Enclosed Cable Track
- 3 Axis Protective Enclosures
- 3 Axis Protective Enclosures
- Precision Ground Linear Rails
- 4" Anti-slip Leveling Feet
Control Features:
- Anti-collision Safety System
- Electronic Height Sensing
- Floating Height Sensing
- Homing Switches
Squickmon’s machine orders placed today are estimated to ship in 5-7 weeks. You are entitled to a full refund minus a 2.4% transaction fee until your order ships.
TALK DIRECTLY TO ONE OF OUR PRODUCT SPECIALISTS
Info@Squickmons.com
Hypertherm
- Powermax 45 SYNC
- Powermax 65 SYNC
- Powermax 85 SYNC
- 3 Phase Only
- Powermax 105 SYNC
- Powermax125 SYNC
Victor thermal dynamics
- Cutmaster A40 45XP, Air, 40 Amps
- Cutmaster A60, Air, 60 Amps
- Cutmaster A80, Air, 80 Amps
- Powermax 120, Air, 120 Amps
Z-AXIS FULLY INTEGRATED MULTI-PROCESS:
- Slim Linear Actuator Design (Increasing Cutting Area)
- 6.5″ Lifter Height (Included on all HD Series)
- Internal Wiring Harness Sub Assembly (For easy diagnosis and repair)
- Integrated Multi-Process Pneumatic Actuator Scribe and Marker
- Protective Front Enclosure (Covering linear components and Pneumatic cylinders)
- Rear Enclosure Protection (Covering Motor Reduction System)
- Enclosed Cable Carrier (Assisting with management of collision detection wiring and pneumatic hoses)
- Scribe & Marker Compatible (Available only for Arc Professional Software Package)
FULLY WELDED FRAME DESIGN
- Fully Welded Frame Design (constructed from 3/16 plate)
- Rigid Design To Counteract Vibrations and Inertia
- Dropped Side Rail Design for 3 Side Material Loading
- 6″ Deep Water Pan
- Recessed Transfer Rollers On All 4 Sides (For Material Loading)
- 4″ Diameter Leveling Feet With Rubber Pads (3/4-11 Thread)
- Machined gear rack mounting surface (Easily replaceable)
- Extended Frame Along Y-Axis For Gantry Parking Zone
- Removable / Replaceable Slat Holders
- Optional Air Bladder available with holding capacity of 2 times upper pan capacity.
COMPUTER STATION & PEDESTAL OPTION
- 225 Degree Pivoting Pedestal Arm Rotation
- 360 Degree Monitor Rotation & 10 inch Height Adjustment (Allowing for Easy Screen Viewing Angles and Ergonomic Screen Placement)
- Full Enclosures With Easy Wire Harness Routing
- Wiring Harness Protection and Consolidation
- Hidden 3 Receptacle Power strip
- Integrated Emergency Stop and Torch ON/OFF
COLLISION DETECTION HEAD-ASSEMBLY
- 2 Axis Squaring For Torch Setup (Referred To In Hypertherm Manual)
- Dual Collision Proximity Sensors (Allowing For Program Stop Within 2 Degrees Out Of Alignment)
- Front Floating Proximity Sensor (Secondary Touch Off Option If Ohmic Fails To Sense Material)
- Indexing Cones Design (Provides Torch Relocating of True Position)
- Unique Hexagon Geometry (Unlike Competitors Our Collision Detection Head Is Designed And Manufactured By Squickmon’s in the USA)
- Integrated Positive Z-Axis Homing (No Material Loading Required For Homing)
TABLE CONSTRUCTION AND SIZE OPTIONS :
- All Elihu Lite Series Systems are Offered in the Sizes Below :
- *2×4 *4×4 *4×8 *5×5
- Machined .625″ T6 6061 Aluminum Gantry Side Plates
- Hiwin Style Linear Rail System Across X & Y-Axis with Recirculating Ball Bearing Cassettes (Creating Smooth Linear Motion)
- 2″ Slat Offset (Helps with tipped parts when Cutting)
- 4.5″ Gantry Clearance (Beneficial When Cutting Large Part profiles, Beams, and Tubing)
- 16g Steel Gantry Enclosure Protection (Guards motors And reduction assemblies from impact)
- Adjustment for Gantry Squaring and Homing Switch Positions
- 3/16 Fully Welded Steel Frame (Extremely Rigid)
- All Elihu X-Lite Series Systems are Sized To Fit A Standard Sheet Width Relative To Their Designated Machine Size Plus 1-2″ Oversized For Cutting Area (Example a 4×8 Machine has a minimum of 49″x97″ Cutting Area)
