CNC plasma cutters
Burn Tables

MACHINE SIZES: 4X8, 5X10, 6X12

Estimated Shipping: 2-4 WEEKS

5 Years Warranty
Made in the USA

BURN TABLE

TALK DIRECTLY TO ONE OF OUR PRODUCT SPECIALISTS

5 Years Warranty
ELIHU HD Series CNC Plasma Table Systems
Play Video

“Product size and features may slightly vary from image shown”

ELIHU HD Series CNC Plasma Table Systems

BUILD YOUR SYSTEM

Please, fill below details to calculate your order.
  • Total: $0.00

-

“Purchases over $30k do not qualify for affirm, please click on Apply for financing at the bottom of the page, or call us to arrange a check or wire transfer payment”

Powermax
Hypertherm
  • Powermax 45XP, Air, 45 Amps

  • Powermax 65, Air, 65 Amps

  • Powermax 85, Air, 85 Amps

3 Phase Only

  • Powermax 105, Air, 105 Amps (208V)

  • Powermax125, Air, 125 Amps (480V)

victor thermal dynamics
  • Cutmaster A40 45XP, Air, 40 Amps

  • Cutmaster A60, Air, 60 Amps

  • Cutmaster A80, Air, 80 Amps

  • Powermax 120, Air, 120 Amps

Cutmaster A80

Z-AXIS FULLY INTEGRATED MULTI-PROCESS:

  • Slim Linear Actuator Design (Increasing Cutting Area)

  • 6.5″ Lifter Height (Included on all HD Series)

  • Internal Wiring Harness Sub Assembly (For easy diagnosis and repair)

  • Integrated Multi-Process Pneumatic Actuator Scribe and Marker

  • Protective Front Enclosure (Covering linear components and Pneumatic cylinders)

  • Rear Enclosure Protection (Covering Motor Reduction System)

  • Enclosed Cable Carrier (Assisting with management of collision detection wiring and pneumatic hoses)

  • Scribe & Marker Compatible (Available only for Arc Professional Software Package)

z-axis fully integrated multi-process
Modular Welded Frame Design

MODULAR WELDED FRAME DESIGN

  • Fully Welded Frame Design (constructed from 3/16 plate)

  • Rigid Design To Counteract Vibrations and Inertia

  • Dropped Side Rail Design for 3 Side Material Loading

  • 6″ Deep Water Pan

  • Recessed Transfer Rollers On All 4 Sides (For Material Loading)

  • 4″ Diameter Leveling Feet With Rubber Pads (3/4-11 Thread)

  • Machined gear rack mounting surface (Easily replaceable)

  • Extended Frame Along Y-Axis For Gantry Parking Zone

  • Removable / Replaceable Slat Holders

  • Optional Air Bladder available with holding capacity of 2 times upper pan capacity.

COMPUTER STATION & PEDESTAL OPTION

  • 225 Degree Pivoting Pedestal Arm Rotation

  • 360 Degree Monitor Rotation & 10 inch Height Adjustment  (Allowing for Easy Screen Viewing Angles and Ergonomic Screen Placement)

  • Full Enclosures With Easy Wire Harness Routing

  • Wiring Harness Protection and Consolidation

  • Hidden 3 Receptacle Power strip

  • Integrated Emergency Stop and Torch ON/OFF

Computer Station & Pedestal Option
Collision Detection Head Assembly

COLLISION DETECTION HEAD-ASSEMBLY

  • 2 Axis Squaring For Torch Setup (Referred To In Hypertherm Manual)

  • Dual Collision Proximity Sensors (Allowing For Program Stop Within 2 Degrees Out Of Alignment)

  • Front Floating Proximity Sensor (Secondary Touch Off Option If Ohmic Fails To Sense Material)

  • Indexing Cones Design (Provides Torch  Relocating of True Position)

  • Unique Hexagon Geometry (Unlike Competitors Our Collision Detection Head Is Designed And Manufactured By Squickmon’s in the USA)

  • Integrated Positive Z-Axis Homing (No Material Loading Required For Homing)

TABLE CONSTRUCTION AND SIZE OPTIONS

  • ​All Elihu HD Series Systems are Offered in the Sizes Below​

    • 4X8
    • 5X10
    • 6X12

    Machined .625″ T6 6061 Aluminum Gantry Side Plates

  • Hiwin Style Linear Rail System Across X & Y-Axis with Recirculating Ball Bearing Cassettes (Creating Smooth Linear Motion)

  • 15,000lb Loading Capacity (For processing material from 26g – 6″ Plate)

  • 2″ Slat Offset (Helps with Tipped parts when Cutting)

  • 6.5″ Gantry Clearance (Beneficial When Cutting Large Part profiles, Beams, and Tubing)

  • 16g Steel Gantry Enclosure Protection (Guards Motors And Reduction Assemblies From Impact)

  • Adjustment for Gantry Squaring and Homing Switch Positions

  • 3/16 Fully Welded Steel Frame (Extremely Rigid)

  • All Elihu HD Series Systems are Sized To Fit A Standard Sheet Width Relative To Their Designated Machine Size Plus 1-2″ Oversized For Cutting Area (Example a 4×8 Machine has a minimum of 49″x97″ Cutting Area)

Whether making custom parts for a passion project or doing metal fabrication for an industry, our burn tables are designed to meet your needs. We manufacture, design, and test all the burn tables we sell at our cutting-edge facility in Phoenix, Arizona. When you order a table from us, you can be confident of receiving a high-quality product. All our tables are made in the USA and come with a 5-year warranty.

What Is a Burn Table?

A burn table is a thermal cutting table that utilizes either a plasma stream or an oxy-fuel mix to either melt materials or sway the process burns. Most burn tables vaporize the meatal burned into a powder, removing it from the cutting zone via a high velocity air or gas stream. Burn tables are primarily used for shape cutting of hot and cold rolled steel. They rely on CNC controls to minimize human error and deliver fabricated parts that require minimal cleanup and post processing. The CNC plasma table holds the materials that will be burned by these processes—laser, oxy-fuel, or plasma—using a CNC cutting machine.

Burn Table Uses

Burn tables play a crucial role in metal cutting and are suitable for various industries. They can be used by fabricators working in:
  • Agriculture
  • Automotive
  • Clothing
  • Food Services
  • Structural Steel
  • Machining
  • Signs Building
  • Heavy Equipment
  • Film and production
  • Tools and Equipment
  • Metal Art and Decorative Metal

About Burn Tables

The right burn table for you will depend on the nature of your project. For a smaller, home-based project, you might be able to use a basic burn table. However, large-scale projects will require more specialized thermal cutting machines and a few considerations. Ultimately, your choice of turn table will depend on the following factors:

Oxy-fuel or plasma

Burn tables are designed to either support oxy-fuel or plasma arc cutting. In oxy-fuel, torches are used to combine gases for high-end cutting. Although this type of cutting is considered the most efficient, it is typically slower than plasma cutting and isn’t of much use on thinner materials. Oxy-fuel burn tables are recommended for sheets ½” and above. With a plasma arch, high pressure dry clean air is needed in large quantities to filter out the burned material from the cut zone. Oxygen can also be used to intensify the burn, but the operator would need to combine it with non-inflammable gases to eliminate the oxygen from the surrounding environment.

Fine plasma

There are also high-definition “fine plasma” systems that are only compatible with CNC machines. These systems have been around since 2004 and offer a faster cutting process with better finishes and detail. However, they must be used with an accurate motion system and CNC machine to achieve the best results. Many modern CNC providers stock these systems so they can offer their customers a quality product that provides the best surface finishes.

Types of Burn Tables

There are different types of burn tables for different CNC machines. These include:
  • Water tables: Water burn tables eliminate harmful arch light, dissipate heat, and keep cut parts cool. You can use these tables without a dust collector.
  • Downdraft tables: Downdraft burn tables are similar to water burn tables, except that their tank is exhausted by high capacity fans instead of water. They can accommodate up to 3” thick plates and are designed to support smaller machines.
  • Dry tables: These are designed to support thermal cutting and are typically built high enough off the floor to allow for easy cleaning of slag and other burned material. It’s best suited for outdoor use as it doesn’t come with a smoke/fume control.
  • Unitized tables: Tables that combine the burning machine and the unitized table into a single unit are referred to as unitized burn tables.

Burn Table Models

Squickmons offers burn tables that are designed to work with top plasma cutter brands, including:
  • Victor Thermal Dynamics
  • Hypertherm
You can operate both Cutmaster and Powermax (3 phase options supported) machines on these burn tables to produce your desired part. Why Choose Us?
  • Made in USA burn tables
  • 5-year manufacturer warranty
  • Three machine sizes: 4×8, 5×10, 6×12
  • 30-day guarantee
  • After sales service
For more info on our burn tables, call 1-877-916-7477 or fill out our contact form here.

Whether making custom parts for a passion project or doing metal fabrication for an industry, our burn tables are designed to meet your needs.

We manufacture, design, and test all the burn tables we sell at our cutting-edge facility in Phoenix, Arizona. When you order a table from us, you can be confident of receiving a high-quality product. All our tables are made in the USA and come with a 5-year warranty.

A burn table is a thermal cutting table that utilizes either a plasma stream or an oxy-fuel mix to either melt materials or sway the process burns. Most burn tables vaporize the meatal burned into a powder, removing it from the cutting zone via a high velocity air or gas stream. Burn tables are primarily used for shape cutting of hot and cold rolled steel. They rely on CNC controls to minimize human error and deliver fabricated parts that require minimal cleanup and post processing. The CNC plasma table holds the materials that will be burned by these processes—laser, oxy-fuel, or plasma—using a CNC cutting machine.

Burn tables play a crucial role in metal cutting and are suitable for various industries. They can be used by fabricators working in:

  • Agriculture
  • Automotive
  • Clothing
  • Food Services
  • Structural Steel
  • Machining
  • Signs Building
  • Heavy Equipment
  • Film and production
  • Tools and Equipment
  • Metal Art and Decorative Metal

The right burn table for you will depend on the nature of your project. For a smaller, home-based project, you might be able to use a basic burn table. However, large-scale projects will require more specialized thermal cutting machines and a few considerations. Ultimately, your choice of turn table will depend on the following factors:

Oxy-fuel or plasma

Burn tables are designed to either support oxy-fuel or plasma arc cutting. In oxy-fuel, torches are used to combine gases for high-end cutting. Although this type of cutting is considered the most efficient, it is typically slower than plasma cutting and isn’t of much use on thinner materials. Oxy-fuel burn tables are recommended for sheets ½” and above. With a plasma arch, high pressure dry clean air is needed in large quantities to filter out the burned material from the cut zone. Oxygen can also be used to intensify the burn, but the operator would need to combine it with non-inflammable gases to eliminate the oxygen from the surrounding environment.

Fine plasma

There are also high-definition “fine plasma” systems that are only compatible with CNC machines. These systems have been around since 2004 and offer a faster cutting process with better finishes and detail. However, they must be used with an accurate motion system and CNC machine to achieve the best results. Many modern CNC providers stock these systems so they can offer their customers a quality product that provides the best surface finishes.

There are different types of burn tables for different CNC machines. These include:

  • Water tables: Water burn tables eliminate harmful arch light, dissipate heat, and keep cut parts cool. You can use these tables without a dust collector.
  • Downdraft tables: Downdraft burn tables are similar to water burn tables, except that their tank is exhausted by high capacity fans instead of water. They can accommodate up to 3” thick plates and are designed to support smaller machines.
  • Dry tables: These are designed to support thermal cutting and are typically built high enough off the floor to allow for easy cleaning of slag and other burned material. It’s best suited for outdoor use as it doesn’t come with a smoke/fume control.
  • Unitized tables: Tables that combine the burning machine and the unitized table into a single unit are referred to as unitized burn tables.

Squickmons offers burn tables that are designed to work with top plasma cutter brands, including:

  • Victor Thermal Dynamics
  • Hypertherm

You can operate both Cutmaster and Powermax (3 phase options supported) machines on these burn tables to produce your desired part.

Why Choose Us?

  • Made in USA burn tables
  • 5-year manufacturer warranty
  • Three machine sizes: 4×8, 5×10, 6×12
  • 30-day guarantee
  • After sales service

For more info on our burn tables, call 1-877-916-7477 or fill out our contact form here.

0
Your Cart is empty!

It looks like you haven't added any items to your cart yet.

Browse Products
Powered Voltage Emoji by Caddy