CNC plasma cutters

ELIHU HD SERIES

Squickmon's
elihu hd cnc plasma table system

MACHINE SIZES: 4X8, 5X10, 6X12

ALL ELIHU HD SERIES SYSTEMS INCLUDE:

  • All-In-One CNC Interface

  • Ohmic Sensing (Probe Zero Sensing)

  • Collision Detection Head (includes torch squaring and integrated floating head Proximity sensor)

  • Z-Axis Lifter 6.5″ (Provides 6.5″ of Z-Axis Travel)

  • 5 year warranty on all CNC electronics (unless shorter warranty period is discussed)

  • 5 year warranty on all mechanical components (unless shorter warranty period is discussed)

  • Lifetime Tech Support

TALK DIRECTLY TO ONE OF OUR PRODUCT SPECIALISTS

OPTIONAL:

  • Intel NUC PC i5 Processor upgradable to i7 Processor

  • Arc Professional – All In One Software (CAD, CAM, CNC)

  • 2 PC Software Licensing

  • ELIHU PC Pedestal with integrated serge protector and wire shielding (Recommended)

  • Rotary Axis Gantry (Including Lathe Chuck (4″, 8″, and 16″ available)

  • Air Bladder with water level adjustment (used for small part removal, maintaining proper water level, and machine clean out)

Play Video

BUILD YOUR SYSTEM

Powermax
Hypertherm
  • Powermax 45XP, Air, 45 Amps

  • Powermax 65, Air, 65 Amps

  • Powermax 85, Air, 85 Amps

3 Phase Only

  • Powermax 105, Air, 105 Amps (208V)

  • Powermax125, Air, 125 Amps (480V)

victor thermal dynamics
  • Cutmaster A40 45XP, Air, 40 Amps

  • Cutmaster A60, Air, 60 Amps

  • Cutmaster A80, Air, 80 Amps

  • Powermax 120, Air, 120 Amps

Cutmaster A80

Z-AXIS FULLY INTEGRATED MULTI-PROCESS:

  • Slim Linear Actuator Design (Increasing Cutting Area)

  • 6.5″ Lifter Height (Included on all HD Series)

  • Internal Wiring Harness Sub Assembly (For easy diagnosis and repair)

  • Integrated Multi-Process Pneumatic Actuator Scribe and Marker

  • Protective Front Enclosure (Covering linear components and Pneumatic cylinders)

  • Rear Enclosure Protection (Covering Motor Reduction System)

  • Enclosed Cable Carrier (Assisting with management of collision detection wiring and pneumatic hoses)

  • Scribe & Marker Compatible (Available only for Arc Professional Software Package)

z-axis fully integrated multi-process
Modular Welded Frame Design

FULLY WELDED FRAME DESIGN

  • Fully Welded Frame Design (constructed from 3/16 plate)

  • Rigid Design To Counteract Vibrations and Inertia 

  • Dropped Side Rail Design for 3 Side Material Loading

  • 6″ Deep Water Pan

  • Recessed Transfer Rollers On All 4 Sides (For Material Loading)

  • 4″ Diameter Leveling Feet With Rubber Pads (3/4-11 Thread)

  • Machined gear rack mounting surface (Easily replaceable)

  • Extended Frame Along Y-Axis For Gantry Parking Zone

  • Removable / Replaceable Slat Holders

  • Optional Air Bladder available with holding capacity of 2 times upper pan capacity. 

COMPUTER STATION & PEDESTAL OPTION

  • 225 Degree Pivoting Pedestal Arm Rotation

  • 360 Degree Monitor Rotation & 10 inch Height Adjustment   (Allowing for Easy Screen Viewing Angles and Ergonomic Screen Placement)

  • Full Enclosures With Easy Wire Harness Routing

  • Wiring Harness Protection and Consolidation

  • Hidden 3 Receptacle Power strip

  • Integrated Emergency Stop and Torch ON/OFF

Computer Station and Pedestal Option
collision detection head assembly

COLLISION DETECTION HEAD-ASSEMBLY

  • 2 Axis Squaring For Torch Setup (Referred To In Hypertherm Manual)

  • Dual Collision Proximity Sensors (Allowing For Program Stop Within 2 Degrees Out Of Alignment)

  • Front Floating Proximity Sensor (Secondary Touch Off Option If Ohmic Fails To Sense Material)

  • Indexing Cones Design (Provides Torch  Relocating of True Position)

  • Unique Hexagon Geometry (Unlike Competitors Our Collision Detection Head Is Designed And Manufactured By Squickmon’s in the USA)

  • Integrated Positive Z-Axis Homing (No Material Loading Required For Homing)

TABLE CONSTRUCTION AND SIZE OPTIONS

  • ​All Elihu HD Series Systems are Offered in the Sizes Below​

    • 4X8

    • 5X10

    • 6X12

    Machined .625″ T6 6061 Aluminum Gantry Side Plates

  • Hiwin Style Linear Rail System Across X & Y-Axis with Recirculating Ball Bearing Cassettes (Creating Smooth Linear Motion)

  • 15,000lb Loading Capacity (For processing material from 26g – 6″ Plate)

  • 2″ Slat Offset (Helps with Tipped parts when Cutting)

  • 6.5″ Gantry Clearance (Beneficial When Cutting Large Part profiles, Beams, and Tubing)

  • 16g Steel Gantry Enclosure Protection (Guards Motors And Reduction Assemblies From Impact)

  • Adjustment for Gantry Squaring and Homing Switch Positions

  • 3/16 Fully Welded Steel Frame (Extremely Rigid)

  • All Elihu HD Series Systems are Sized To Fit A Standard Sheet Width Relative To Their Designated Machine Size Plus 1-2″ Oversized For Cutting Area (Example a 4×8 Machine has a minimum of 49″x97″ Cutting Area)

Table Construction and Size Options
0
Your Cart is empty!

It looks like you haven't added any items to your cart yet.

Browse Products
Powered Voltage Emoji by Caddy